Measuring for a shower screen involves careful attention to detail to ensure a proper fit. Here’s a step-by-step guide to help you measure your shower area accurately:
Tools Needed:
- Tape measure
- Pencil and paper
- Level (optional but recommended for checking level and plumb)
Steps:
1. Measure the Width:
- Top Width: Measure the width of the opening at the top.
- Middle Width: Measure the width of the opening at the middle.
- **Bottom Width**: Measure the width of the opening at the bottom.
- Record the smallest width of the three measurements to ensure the shower screen fits in the narrowest part.
2. Measure the Height:
- Left Height: Measure the height from the base (shower floor or tub edge) to the top of the area where you want the shower screen to end on the left side.
- Right Height: Measure the height from the base to the top on the right side.
3. Check for Level and Plumb:
- Use a level to check if the base where the shower screen will sit is level. If it’s not, you may need to make adjustments during installation.
- Check if the walls are plumb (vertically straight). Measure the top, middle, and bottom distances from the wall to the planned edge of the screen. If the measurements differ, the wall is not plumb, and you may need to make adjustments or use filler strips during installation.
4. Measure Any Angles or Unique Features:
- If your shower area has any angles or unique features (like a step or a ledge), measure these carefully and note their dimensions. These will need to be taken into account when ordering a custom shower screen.
5. Measure for Door Swing (if applicable):
- If your shower screen includes a door, determine the swing direction (inward or outward) and measure the space available for the door to open fully without obstruction.
With these measurements, you can accurately order a shower screen that fits well. If your shower area is significantly out of level or plumb, consider consulting with a professional for installation.